Mastering GRI 305: How to Report Scope 1, Scope 2 & Scope 3 Emissions

Executive Briefing • GRI 305 Environmental Standard

Key Takeaways for Carbon Accountants & ESG Controllers

  • Complete 7-Disclosure Architecture: GRI 305: Emissions 2016 governs both greenhouse gas (GHG) accounting (GRI 305-1 through 305-5) and non-GHG atmospheric pollutants including ozone-depleting substances (GRI 305-6) and $\text{NO}_\text{x}$, $\text{SO}_\text{x}$, and particulate matter (GRI 305-7).
  • Gross Inventory Rule (No Netting of Offsets): Under GRI 305-1, 305-2, and 305-3, gross emissions must be reported excluding any carbon credits, offsets, or avoided emissions. Biogenic $\text{CO}_2$ emissions must be reported separately from the scopes.
  • Dual Scope 2 Reporting: GRI 305-2 requires reporting gross location-based energy indirect emissions and, where contractual instruments (such as I-RECs, GOs, or captive solar PPAs) exist, gross market-based emissions.
  • Direct Alignment with ISO 14064-1 & SEBI BRSR Core: Structuring your carbon inventory to satisfy GRI 305 simultaneously builds the primary audit trail for ISO 14064-1 verification and SEBI BRSR Principle 6 (Attribute 1).

When evaluating the Gri 305 Emissions framework, when evaluating the Gri 305 Emissions framework, when evaluating the Gri 305 Emissions framework, when evaluating the Gri 305 Emissions framework, across nearly every industry—from heavy manufacturing, cement, and pharmaceuticals to banking and IT services—climate change and atmospheric emissions rank at the very top of corporate materiality assessments. Once an organization identifies climate or air quality as a material topic under GRI 3: Material Topics 2021, it must report its quantitative inventory using GRI 305: Emissions.

Built on the technical foundation of the GHG Protocol Corporate Accounting and Reporting Standard and ISO 14064-1, the GRI 305 emissions standard is the most heavily scrutinized section of any sustainability report during third-party assurance. A single methodological misstep—such as mixing biogenic biomass emissions into Scope 1, applying an outdated grid emission factor in Scope 2, or subtracting carbon offsets from gross emissions—frequently leads to a qualified assurance statement.

In this comprehensive technical walkthrough, part of our Complete GRI Certification & Reporting Master Guide, we break down every disclosure from GRI 305-1 to GRI 305-7, explain the exact calculation boundaries, and provide an auditor-ready activity data and emission factor checklist.

1. Disclosure-by-Disclosure Breakdown of GRI 305 (305-1 to 305-7)

When reporting on emissions as a material topic under the GRI Standards, an organization must first disclose its management approach using GRI 3-3 (policies, decarbonization governance, and transition targets) and then report the applicable metric disclosures below:

GRI 305-1: Direct (Scope 1) GHG Emissions

GRI 305-1 captures direct greenhouse gas emissions from sources that are owned or controlled by the reporting organization. Key technical requirements include:

  • Emission Sources Included: Stationary combustion (boilers, furnaces, diesel generators), mobile combustion (company-owned vehicle fleets), physical or chemical process emissions (e.g., calcination in cement manufacturing), and fugitive emissions (refrigerant leaks from HVAC chillers such as R-410A or R-134a, and $\text{SF}_6$ leaks from electrical switchgear).
  • The 7 Mandatory Greenhouse Gases: Calculations must cover Carbon Dioxide ($\text{CO}_2$), Methane ($\text{CH}_4$), Nitrous Oxide ($\text{N}_2\text{O}$), Hydrofluorocarbons (HFCs), Perfluorocarbons (PFCs), Sulphur Hexafluoride ($\text{SF}_6$), and Nitrogen Trifluoride ($\text{NF}_3$), converted into metric tons of $\text{CO}_2$ equivalent ($\text{tCO}_2\text{e}$).
  • Biogenic $\text{CO}_2$ Separation (Clause 305-1-c): Direct $\text{CO}_2$ emissions from the combustion or biodegradation of biomass (e.g., bagasse, wood pellets, biodiesel) must not be included in gross Scope 1; they must be calculated and reported as a separate line item in $\text{tCO}_2\text{e}$ (note that $\text{CH}_4$ and $\text{N}_2\text{O}$ from biomass are included in Scope 1).
  • Consolidation Approach (Clause 305-1-f): Explicitly state whether the inventory boundary was consolidated using the Equity Share, Financial Control, or Operational Control approach.

GRI 305-2: Energy Indirect (Scope 2) GHG Emissions

GRI 305-2 measures indirect GHG emissions resulting from the generation of purchased or acquired electricity, heating, cooling, and steam consumed by the organization. Aligned with the GHG Protocol Scope 2 Guidance, GRI 305-2 mandates dual reporting where applicable:

  • Location-Based Method (Clause 305-2-a): Reflects the average emissions intensity of the regional or national power grid where energy consumption occurs (for Indian operations, organizations use the latest weighted average grid emission factor published in the Central Electricity Authority [CEA] $\text{CO}_2$ Baseline Database, expressed in $\text{tCO}_2/\text{MWh}$).
  • Market-Based Method (Clause 305-2-b): Reflects emissions from electricity that the organization has purposefully chosen through contractual instruments—such as Power Purchase Agreements (PPAs), green tariffs, or unbundled Energy Attribute Certificates like I-RECs (International Renewable Energy Certificates) that meet strictScope 2 Quality Criteria.

GRI 305-3: Other Indirect (Scope 3) GHG Emissions

GRI 305-3 covers all other indirect GHG emissions occurring outside the organization’s Scope 1 and 2 boundaries across its upstream and downstream value chain. Organizations must screen the 15 Scope 3 Categories defined by the GHG Protocol Corporate Value Chain Standard and disclose:

  • Gross other indirect (Scope 3) GHG emissions in metric tons of $\text{CO}_2\text{e}$, excluding any carbon trades or offsets (305-3-a).
  • The specific upstream and downstream Scope 3 categories and activities included in the calculation—such as Category 1: Purchased goods and services, Category 4: Upstream transportation and distribution, Category 6: Business travel, and Category 11: Use of sold products (305-3-d).
  • Biogenic $\text{CO}_2$ emissions in the value chain reported separately (305-3-c), along with the source of emission factors and global warming potential (GWP) rates used (305-3-f).

GRI 305-4: GHG Emissions Intensity

While absolute emissions track total planetary impact, GRI 305-4 normalizes emissions against business growth by requiring a GHG emissions intensity ratio:

$$\text{GHG Intensity Ratio} = \frac{\text{Absolute GHG Emissions (}\text{tCO}_2\text{e)}}{\text{Organization-Specific Metric (Unit of Output or Revenue)}}$$

Under GRI 305-4-b, the organization must state the chosen denominator—such as metric tons of crude steel produced, megawatt-hours generated, square meters of commercial floor space, or Rupees/USD of total revenue (matching SEBI BRSR Principle 6 Essential Indicator 7, which requires GHG intensity per Rupee of turnover and PPP-adjusted turnover)—and specify whether the numerator includes Scope 1, Scope 2, and/or Scope 3.

GRI 305-5: Reduction of GHG Emissions

GRI 305-5 tracks verified, real-world emissions reductions achieved as a direct result of decarbonization initiatives (e.g., boiler fuel switching from coal to natural gas/biomass, energy efficiency retrofits, or rooftop solar installation). Reductions must be stated in $\text{tCO}_2\text{e}$ relative to a documented base year or baseline, specifying which scopes the reductions occurred in. Crucial Rule: Reductions resulting from outsourcing production or closing/selling a high-emitting plant cannot be claimed as operational emission reductions under GRI 305-5.

GRI 305-6 & GRI 305-7: ODS and Non-GHG Air Pollutants

Industrial and manufacturing entities must also report non-GHG atmospheric pollutants where material:

  • GRI 305-6 (Emissions of ozone-depleting substances – ODS): Production, imports, exports, and emissions of substances regulated under the Montreal Protocol (such as HCFC-22 in legacy chillers), reported in metric tons of CFC-11 equivalent.
  • GRI 305-7 (Nitrogen oxides [$\text{NO}_\text{x}$], sulfur oxides [$\text{SO}_\text{x}$], and other significant air emissions): Stack and fugitive emissions of $\text{NO}_\text{x}$, $\text{SO}_\text{x}$, Persistent Organic Pollutants (POP), Volatile Organic Compounds (VOC), Hazardous Air Pollutants (HAP), and Particulate Matter ($\text{PM}_{10}$ and $\text{PM}_{2.5}$), reported in kilograms or metric tons (directly aligning with CPCB/SPCB Consent to Operate stack monitoring logs and SEBI BRSR Principle 6 Essential Indicator 6).

2. Master Audit Checklist: Activity Data, Emission Factors & Assurance Red Flags

Use the technical reference table below to structure your internal carbon accounting workbooks prior to external assurance:

GRI DisclosurePrimary Activity Data RequiredRecognized Emission Factor / GWP SourcesCommon External Assurance Red Flags
GRI 305-1
(Scope 1 Direct)
Fuel purchase invoices (Diesel, Natural Gas, Furnace Oil, Coal in liters/kg/SCM), weighbridge logs, and HVAC refrigerant top-up maintenance job cards.IPCC 2006 / 2019 Refinement Guidelines; DEFRA (UK DESNZ); US EPA; IPCC AR6 (100-year GWP values).Omitting fugitive refrigerant recharging (R-410A/R-134a) from office/factory chillers; mixing biogenic biomass $\text{CO}_2$ into gross Scope 1.
GRI 305-2
(Scope 2 Indirect)
Monthly utility electricity bills (kWh / MWh), open-access wheeling statements, and retired I-REC / Green Tariff redemption certificates.India: CEA $\text{CO}_2$ Baseline Database (latest version); Global: IEA Emission Factors, US EPA eGRID, AIB Residual Mix.Using kVAh billed demand instead of actual kWh active energy consumed; claiming zero market-based emissions without formal I-REC retirement proof.
GRI 305-3
(Scope 3 Value Chain)
ERP procurement spend/weight logs (Cat. 1), logistics ton-kilometers (Cat. 4 & 9), waste manifest weights (Cat. 5), travel PNR logs (Cat. 6).Ecoinvent LCA database, DEFRA Scope 3 factors, US EPA EEIO (spend-based), primary supplier-specific EPD data.Reporting only “easy” categories (e.g., Business Travel Cat. 6) while ignoring Purchased Goods (Cat. 1) which represents >70% of manufacturing footprint.
GRI 305-4
(GHG Intensity)
Audited production volume (MT) or Ind-AS audited revenue from operations, paired with verified Scope 1+2 numerator.Internal audited financial/production ERP ledgers + SEBI BRSR PPP conversion factors (IMF).Mismatch between the revenue/production denominator used in the Sustainability Report and the audited Annual Financial Report.
GRI 305-7
($\text{NO}_\text{x}$, $\text{SO}_\text{x}$, PM)
NABL-accredited laboratory stack emission test reports ($\text{mg/Nm}^3$), flue gas flow rates ($\text{Nm}^3/\text{hr}$), and boiler operating hours.Direct Continuous Emission Monitoring System (CEMS) mass integration or US EPA AP-42 factors.Reporting concentration averages ($\text{mg/Nm}^3$) instead of converting to total annual mass load (metric tons or kg) as required by GRI 305-7.
MCMCER Faculty & Audit Field Note

The Concentration vs. Mass Load Error in GRI 305-7 & BRSR Principle 6: One of the most frequent technical errors we correct during corporate audits in India involves $\text{NO}_\text{x}$, $\text{SO}_\text{x}$, and Particulate Matter (PM). Plant EHS teams routinely paste the stack test concentration number (e.g., $42\text{ mg/Nm}^3$) directly into their report. However, GRI 305-7 requires total mass emissions (in kg or metric tons). To convert concentration into annual mass load, you must multiply: $\text{Concentration (mg/Nm}^3) \times \text{Volumetric Stack Flow Rate (Nm}^3\text{/hr)} \times \text{Annual Operating Hours} \times 10^{-9}\text{ (for Metric Tons)}$.

Dual Technical Mastery

Master GHG Accounting, ISO 14064 Auditing & GRI 305

Build audit-proof Scope 1, 2, and 3 carbon inventories and qualify as a certified practitioner through MCMCER’s live executive training programs.

3. Base Year Recalculation Rules Under GRI 305

Across GRI 305-1-e, 305-2-e, and 305-3-e, organizations must disclose their chosen base year for emissions tracking, the rationale for choosing it, the emissions in the base year, and the context for any significant emissions changes that triggered a recalculation of base year emissions.

Following the GHG Protocol and Foundations of Net Zero and GHG Accounting, an organization must retroactively recalculate its base year inventory whenever a structural or methodological change exceeds its predetermined significance threshold (typically 5% of total base-year emissions):

  • Structural Changes Requiring Recalculation: Mergers, acquisitions, or divestments of facilities/subsidiaries, or insourcing/outsourcing of major emitting activities that existed during the base year.
  • Methodological Changes Requiring Recalculation: Upgrading from spend-based emission factors to primary physical activity data, or correcting a significant historical calculation error.
  • When NOT to Recalculate Base Year: Organic business growth, factory production volume increases/decreases, or opening a brand-new greenfield facility that did not exist in the base year.

To integrate your GRI 305 disclosures with the complete GRI reporting ecosystem, visit our Complete GRI Certification Master Guide or enroll in the MCMCER GRI Certification Program.

Frequently Asked Questions: GRI 305 Emissions Reporting

GRI 305-1 covers Direct (Scope 1) GHG emissions from sources owned or controlled by the organization (such as boilers, company vehicles, and refrigerant leaks). GRI 305-2 covers Energy Indirect (Scope 2) GHG emissions from purchased electricity, steam, heating, and cooling. GRI 305-3 covers Other Indirect (Scope 3) GHG emissions occurring across the organization’s upstream and downstream value chain (such as purchased raw materials, logistics, business travel, and use of sold products).

No. Clauses 305-1-a, 305-2-a, and 305-3-a explicitly require reporting gross GHG emissions excluding any trades, such as purchases, sales, or transfers of carbon offsets or allowances. Purchased carbon credits may be disclosed separately in the narrative, but cannot reduce your reported Scope 1, 2, or 3 inventory totals.

Under GRI 305-1-c and GRI 305-3-c, biogenic CO2 emissions resulting from the combustion or biodegradation of biomass (e.g., agro-residue briquettes, bagasse, wood chips, or biofuels) must be excluded from gross Scope 1 and Scope 3 totals and reported as a separate standalone figure in metric tons of CO2. However, CH4 and N2O emitted from biomass combustion must still be included inside Scope 1.

For facilities operating in India, organizations should use the official national grid emission factor (weighted average including renewable energy when calculating total grid intensity) published annually by the Ministry of Power’s Central Electricity Authority (CEA) CO2 Baseline Database for the Indian Power Sector.

Professionals can enroll in MCMCER’s GRI Certification Program to master sustainability reporting across all GRI standards, and pair it with the ISO 14064 Carbon Lead Auditor Training for deep technical expertise in GHG verification.

Emissions Standard: GRI 305: Emissions Standard (Global Reporting Initiative).

Editorial Contributor

Mr. Rahul Sharma

Faculty and researcher at the M.C. Mehta Center for Education and Research (MCMCER), specializing in environmental jurisprudence, BRSR reporting, and global ESG disclosure frameworks.

View Academic Faculty & Board →